Wiring Solutions

1/10

Electrical wiring is an electrical installation of cabling and associated devices such as switches, distribution boards, sockets and light fittings in a structure.

Wiring is subject to safety standards for design and installation. Allowable wire and cable types and sizes are specified according to the circuit operating voltage and electric current capability, with further restrictions on the environmental conditions, such as ambient temperature range, moisture levels, and exposure to sunlight and chemicals.

Associated circuit protection, control and distribution devices within a building's wiring system are subject to voltage, current and functional specification.

Industrial Plugs & Sockets

Industrial and multiphase plugs and sockets provide a connection to the electrical mains rated at higher voltages and currents than household plugs and sockets. They are generally used in polyphase systems, with high currents, or when protection from environmental hazards is required. Industrial outlets may have weatherproof covers, waterproofing sleeves, or may be interlocked with a switch to prevent accidental disconnection of an energized plug. Some types of connectors are approved for hazardous areas such as coal mines or petrochemical plants, where flammable gas may be present.

Plugs, Sockets & Connectors
Switched Interlocked Sockets
Extra Low Voltage Plugs & Sockets
Container Plugs & Sockets
Caravan Plugs & Sockets
Plugs & Sockets with Earth Contact
Adaptors & Appliance Inlets
Inclined Sockets

Safety Switches & Isolators

In electrical engineering, a disconnector, disconnect switch or isolator switch is used to ensure that an electrical circuit is completely de-energized for service or maintenance. Such switches are often found in electrical distribution and industrial applications, where machinery must have its source of driving power removed for adjustment or repair. High-voltage isolation switches are used in electrical substations to allow isolation of apparatus such as circuit breakers, transformers, and transmission lines, for maintenance. The disconnector is usually not intended for normal control of the circuit, but only for safety isolation. Disconnectors can be operated either manually or automatically.

Industrial And Domestic Exhaust Fans

An industrial fan is a machine whose primary function is to provide and accommodate a large flow of air or gas to various processes of many industries. This is achieved by rotating a number of blades, connected to a hub and shaft, and driven by a motor. The flow rates of these fans vary according to their application. A blower is another name for a fan that operates where the resistance to the flow is primarily on the downstream side of the fan.